2022-06-17

Brace - Headlight - LH (Remove and Replace)

Correction code 17400122 0.72 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the front fascia assembly. See Fascia Assembly - Front (Remove and Install).
  2. Remove the LH headlight. See Headlight - LH (Remove and Replace).
  3. Gently release the clips (x2) that attach the electrical harness to the LH headlight brace.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Headlight brace tabs for the electrical harness clips are very fragile.
  4. Remove the bolts (x4) that attach the LH headlight brace to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, 10mm

Install

  1. Install the bolts (x4) that attach the LH headlight brace to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    4x bolts, 10mm, 4 Nm
  2. Position the clips (x2) that attach the electrical harness to the LH headlight brace.
    Warning IconA warning icon, calling your attention to a possibly risky situation
    CAUTION
    Headlight brace tabs for the electrical harness clips are very fragile.
  3. Install the LH headlight. See Headlight - LH (Remove and Replace).
  4. Install the front fascia assembly. See Fascia Assembly - Front (Remove and Install).