Trim - A-Pillar - Lower - LH (Remove and Replace)
Correction code 15182402 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Remove the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).
-
Release the clips (x7) that attach the
LH lower A-pillar trim to the vehicle.
Install
-
Position the LH lower A-pillar trim
onto the A-pillar, and then fasten the clips (x7) that attach the trim to the
vehicle.
- Install the LH middle A-pillar trim. See Trim - A-Pillar - Middle - LH (Remove and Replace).