Trim - Liftgate - Lower (Remove and Replace)
Correction code
15111302
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Open the liftgate.
-
Release the clips (x8) that attach the
lower liftgate trim to the liftgate, then disconnect the electrical connectors (x2), and
then remove the trim from the vehicle.
CAUTIONDo not let hang or drop quickly the lower liftgate trim, otherwise damage to the electrical connectors will result.
- Release the tabs (x3) that attach the trunk task light cover to the trunk task light, and then remove the trunk task light cover from the lower liftgate trim.
- Release the tabs (x5) that attach the trunk task light to the lower liftgate trim, and then remove the task light from the liftgate trim.
- Release the tabs (x2) that attach the liftgate switch to the lower liftgate trim, and then remove the switch from liftgate trim.
Install
-
Install the liftgate switch into the
lower liftgate trim.
NoteThe liftgate switch is slotted and can only be installed one way.
-
Install the trunk task light into the lower liftgate trim.
NoteHolding tabs (x5)
- Install the trunk task light cover into the trunk task light.
- Connect the electrical connectors (x2), and then fasten the clips (x8) that attach the lower liftgate trim to the liftgate.
- Close the liftgate.