17/06/2022 13:07:10

Closeout Panel - Latch - C-Pillar - LH (Remove and Replace)

Correction code 11700072 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Move the front seats forward.
  2. Remove LH and RH 2nd row seat side bolsters. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
  3. Remove the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  4. Fold the LH 2nd row seat to the down position.
    Informational PurposesAn informational icon, calling your attention
    Note
    Protect the 2nd row seat back before lowering.
  5. Remove the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  6. Release the clips (x3) that attach the LH C-pillar mid and lower BIW bracket to the vehicle, and then remove the bracket from the vehicle..
  7. Fold the LH rear wheelhouse absorber aside for access to the LH C-pillar latch closeout panel, and then release the latch cable from the wheelhouse absorber.
  8. Remove the LH C-pillar latch closeout panel from the vehicle.

Install

  1. Install the LH C-pillar latch closeout panel for the LH rear door latch assembly.
  2. Fold the LH rear wheelhouse absorber to its original position, and then install the release cable onto wheelhouse absorber.
  3. Install the LH C-pillar mid and lower BIW bracket.
  4. Install the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  5. Fold the LH 2nd row seat to the up position, and then remove the seat cushion protection.
  6. Install the 2nd row lower seat cushion. See Seat Cushion - Lower - 2nd Row (Remove and Replace).
  7. Install LH and RH 2nd row seat side bolsters. See Bolster - Outer - Seat - 2nd Row - LH (Remove and Replace).
  8. Move the front seats to the original positions.