17/06/2022 13:07:30

Seal - Outer Belt - Rear Door - LH (Remove and Replace)

Correction code 11704402 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Starting from the rear edge, carefully lift and roll the LH rear door outer belt seal outward to remove it from the vehicle.

Install

  1. Align the LH rear door outer belt seal onto the door assembly, and then carefully press the seal downward to install it onto the door assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use P-80 Emulsion lubricant to lubricate the seal to aid in installation.