Trim - A-Pillar - Middle - LH (Remove and Replace)
Correction code
15182602
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Open the LH front door and fully lower the LH front window.
-
Release the clip and tabs (x2) that
attach the LH middle A-pillar trim to the vehicle.
Install
-
Position the LH middle A-pillar trim onto the A-pillar, and then fasten the clip and
tabs (x2) that attach the trim to the vehicle.
- Raise the LH front window and close the LH front door.