2025-02-20

Latch - Liftgate (Remove and Replace)

Correction code 11355002 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Warning IconA warning icon, calling your attention to a possibly risky situation
Warning
This procedure is a DRAFT. Although it has been validated, Warnings and Cautions might be missing. Follow safety requirements and use extreme caution when working on or near High Voltage systems and components. Provide corrections and feedback to ServiceDevelopment@teslamotors.com.
  1. Open liftgate
  2. Remove lower liftgate trim
    Informational PurposesAn informational icon, calling your attention
    Note
    8x clips, 2x connectors, Be careful not to hang or drop quickly to prevent damage to connectors
  3. Release liftgate latch power release cable from liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    1x holding tab
  4. Disconnect liftgate latch power release connector
    Informational PurposesAn informational icon, calling your attention
    Note
    1x connector
  5. Remove bolts securing liftgate latch power release to liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, T30, 10 Nm
  6. Remove liftgate latch power release from liftgate and release liftgate high force cinching actuator cable
    Informational PurposesAn informational icon, calling your attention
    Note
    2x holding tabs
  7. Connect liftgate high force cinching actuator cable to liftgate latch power release and position into liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    2x holding tabs
  8. Install bolts securing liftgate latch power release to liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    2x bolts, T30, 10 Nm
  9. Connect liftgate latch power release connector
    Informational PurposesAn informational icon, calling your attention
    Note
    1x connector
  10. Install liftgate latch power release cable to liftgate
    Informational PurposesAn informational icon, calling your attention
    Note
    1x holding tab
  11. Install lower liftgate trim
    Informational PurposesAn informational icon, calling your attention
    Note
    8x clips, 2x connectors
  12. Close liftgate