15/11/2023 23:14:58

Insulator - Top Cowl (Remove and Replace)

Correction code 15307302 1.02 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

  • 2023-11-15: Reorganized the procedure.

Remove

  1. Remove the instrument panel sub-assembly. See Sub Assembly - Instrument Panel (Remove and Install).
  2. Remove the bolts (x2) that attach the instrument panel cowl link to the vehicle.
    Tip: Use of the following tool(s) is recommended:
    • Flex head ratchet/flex head torque wrench
    • 10 mm socket
  3. Remove the top cowl insulator from the top link.
    Informational PurposesAn informational icon, calling your attention
    Note
    Lift the cowl link slightly and slide the insulator rearward.

Install

  1. Install the top cowl insulator to the top link.
  2. Align the datums (x2) and install the bolts (x2) that attach the instrument panel cowl link to the vehicle.
    6 Nm (4.4 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • Flex head ratchet/flex head torque wrench
    • 10 mm socket
    • Ratchet/torque wrench
  3. Install the instrument panel sub-assembly. See Sub Assembly - Instrument Panel (Remove and Install).