Duct - Side Window Defrost - LH (Remove and Replace)
Correction code
18100072
0.36
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the main instrument panel decor. See Decor - Instrument Panel - Main (Remove and Replace).
- Remove the rivets (x2) that attach the LH side window defrost duct, and then rotate the duct up and out of the instrument panel duct to remove it from the vehicle.
Install
-
Position the LH side window defrost
duct into the vehicle, and then install the rivets (x2) that attach the defrost duct to
the vehicle.
NoteRotate the defrost duct up and into the instrument panel duct to install it into the vehicle.
- Install the main instrument panel decor. See Decor - Instrument Panel - Main (Remove and Replace).