MXP2 FRONT DRIVE UNIT - Front Drive Unit Assembly - Palladium - FDU Output Axle Seal - RH (RR) (Remove and Replace)
Correction code
39300101101
39300101102
FRT
0.00
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
- 2026-06-24: Released new procedure.
Remove
- Remove the RH front halfshaft. See Halfshaft - Front Drive Unit - RH (Remove and Replace).
-
Remove the LH front output axle seal
from the front drive unit.
Install
-
Install the LH front output axle seal
into the front drive unit.
- Install the RH front halfshaft. See Halfshaft - Front Drive Unit - RH (Remove and Replace).