08/08/2022 13:31:05

Cover - Bracket - 3rd Row - LH (Remove and Replace)

Correction code 13094102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the liftgate.
  2. Fold the LH 3rd row seat back to the down position.
  3. Remove the trunk rear load floor. See Trunk Load Floor - Rear (Remove and Replace).
  4. Remove the trunk carpet.
  5. Press the tab outward, and then pull to release the LH 3rd row bracket cover from the vehicle.

Install

  1. Position the LH 3rd row bracket cover into the vehicle, and then secure the tab that attaches the cover to the vehicle.
  2. Install the trunk carpet
  3. Install the trunk rear load floor. See Trunk Load Floor - Rear (Remove and Replace).
  4. Raise the LH 3rd row seat back.
  5. Close the liftgate.