17/06/2022 13:37:47

Speaker - Liftgate - LH (Remove and Replace)

Correction code 21213002 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the LH front door and lower the LH front window.
  2. Open the liftgate.
  3. Remove the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace).
  4. Remove the liftgate speaker grille. See Grille - Speaker - Liftgate (Remove and Replace).
  5. Remove the screws (x2) that attach the LH liftgate speaker to the liftgate, remove the speaker from the liftgate, and then disconnect the electrical connector.
    2.3 Nm (1.7 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • T20 socket

Install

  1. Position the LH liftgate speaker onto the liftgate, connect the electrical connector, and then install the screws (x2) that attach the speaker to the liftgate.
    2.3 Nm (1.7 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • T20 socket
  2. Install the liftgate speaker grille. See Grille - Speaker - Liftgate (Remove and Replace).
  3. Install the lower liftgate trim. See Trim - Liftgate - Lower (Remove and Replace).
  4. Close the liftgate.
  5. Raise the LH front window and close the LH front door.