08/07/2022 08:19:53

Underhood Apron - LH (Remove and Replace)

Correction code 12251202 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  2. Work from the hood hinge forward to release the clips (x11) that attach the LH underhood apron to the body, and then remove the apron from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Remove the clip at the headlamp, if retained there, and then install onto the LH underhood apron.

Install

  1. Install the LH underhood apron to the body, and then work from the front of the vehicle to the hinge to fasten the clips (x11) that attach the apron to the body.
  2. Install the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).