17/06/2022 13:10:19

Underhood Apron - Rear (Remove and Replace)

Correction code 12251102 0.05 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the hood.
  2. Release the clips (x11) that attach the rear underhood apron to the vehicle, and then remove the apron from the vehicle.

Install

  1. Install the rear underhood apron into the vehicle, and then fasten the clips (x11) that attach the apron to the vehicle.
  2. Close the hood.