2026-08-25

Trim - C-Pillar - Upper - LH (2025+) (Remove and Replace)

Correction code 1518020802 FRT 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the correction code and its associated FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. NOTE: See Personal Protection to make sure you are wearing proper PPE when performing the procedure below. NOTE: See Ergonomic Precautions for safe and healthy working practices.

Remove

  1. Open the LH falcon door and move the LH monopost seat forward.
  2. Open the liftgate.
  3. Fold the LH 3rd row seat back into the down position.
  4. Remove the rear load floor.
  5. Release the clips (x12) that secures the upper and side portions of the lower C-pillar trim to create clearance.
  6. Release the clips and datums and remove the LH C-pillar trim from the vehicle.

Install

  1. Install the LH upper C-pillar trim to the body and then fasten the clips and datums that attach the upper C-pillar trim to the body.
  2. Install the clips (x12) that secures the upper and side portions of the lower C-pillar trim to the body.
    Note
    Line up with bracket to secure the clips.
  3. Install the rear load floor.
  4. Fold the LH 3rd row seat back into the up position.
  5. Move the LH monopost seat back to its original position.
  6. Close the liftgate and the LH falcon door.