17/06/2022 13:07:07

Aero Seal - Hood (Remove and Replace)

Correction code 11701812 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the hood.
  2. Release the clips (x7) that attach the hood aero seal to the hood, and then remove the seal from the vehicle.

Install

  1. Position the hood aero seal onto the hood, and then fasten the clips (x7) that attach the seal to the hood.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure all the clips are secure and flush with the hood.
  2. Close the hood.