02/11/2023 00:35:06
Shroud - Cooling Fan Module (Remove and Replace)
Correction code 183097021.40 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
- 2023-10-31: Reorganized the procedure.
Remove
- Remove the 21mm radiator. See 21mm Radiator (Remove and Replace).
-
Remove the cooling fan module shroud from the vehicle.
Install
- Position the cooling fan module shroud onto the 21mm radiator.
- Install the 21mm radiator. See 21mm Radiator (Remove and Replace).