30/06/2022 13:43:36

Racetrack Trim - Lower - LH (Remove and Replace)

Correction code 15187102 0.30 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the LH and RH front doors.
  2. Lower the LH and RH front windows.
  3. Open the LH and RH falcon wing doors.
  4. Remove the LH rear sill panel trim. See Trim - Sill Panel - Rear - LH (Remove and Replace).
  5. Open the liftgate.
  6. Fold the LH 3rd row seat downward.
  7. Release the clips (x4) that attach the LH trunk sill side trim to the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • Plastic trim tool
  8. Remove the LH mid C-pillar trim. See Trim - C-Pillar - Mid - LH (Remove and Replace).
  9. Remove the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  10. Release the clips (x10) that attach the lower portion of the LH rear racetrack trim to the vehicle, and then move the trim inward to gain access to the LH lower racetrack trim.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • Plastic trim tool
  11. Release the tabs (x4) that attach the LH rear door striker insert to the LH lower racetrack trim, and then remove the insert from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • Plastic trim tool
  12. Release the clips (x6) that attach the inboard side of the LH lower racetrack trim to the vehicle, rotate the trim upwards to release the clips (x2) that attach the trim to the lower B-pillar racetrack bracket, and then remove the trim from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • Plastic trim tool

Install

  1. Position the LH lower racetrack trim on the vehicle, install the clips (x2) that attach the trim to the lower B-pillar racetrack bracket, and then rotate the trim downwards to install the clips (x6) that attach the trim to the vehicle.
  2. Position the LH rear door striker insert on the vehicle, and then install the tabs (x4) that attach the insert to the LH lower racetrack trim.
    Informational PurposesAn informational icon, calling your attention
    Note
    4x tabs
  3. Install the clips (x10) that attach the lower portion of the LH rear racetrack trim to the vehicle.
  4. Ensure that the falcon wing door seal is seated behind the LH rear racetrack trim.
  5. Install the LH lower C-pillar trim. See Trim - C-Pillar - Lower - LH (Remove and Replace).
  6. Install the LH mid C-pillar trim. See Trim - C-Pillar - Mid - LH (Remove and Replace).
  7. Install the clips (x4) that attach the LH trunk sill side trim to the vehicle.
  8. Move the LH 3rd row seat to original position.
  9. Close the liftgate.
  10. Install the LH rear sill panel trim. See Trim - Sill Panel - Rear - LH (Remove and Replace).
  11. Close the LH and RH falcon wing doors.
  12. Raise the LH and RH front windows.
  13. Close the LH and RH front doors.