20/07/2023 00:43:05

Trunk Load Floor - Front (Remove and Replace)

Correction code 15305002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Move the driver seat and the front passenger seat fully forward.
  2. Fold down the 2nd row seats.
  3. Remove the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  4. Remove the front trunk load floor.

Install

  1. Install the front trunk load floor.
  2. Install the rear trunk load floor. See Trunk Load Floor - Rear (Remove and Replace).
  3. Fold the 2nd row seats to the original position.
  4. Restore the driver seat and front passenger seat back to their original position.