06/01/2023 16:08:06

Hose - Drain - HVAC (Remove and Replace)

Correction code 18103602 4.32 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the HV battery. See HV Battery (AWD) (Remove and Install).
  2. Release the clips (x2) that attach the front HVAC drain hose to the vehicle, and then remove the hose from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Use of the following tool(s) is recommended:
    • Clip pry tool
    • Plastic trim tool

Install

  1. Position the front HVAC drain hose on the vehicle, and then install the clips (x2) that attach the hose to the vehicle.
  2. Install the HV battery. See HV Battery (AWD) (Remove and Install).