17/11/2023 14:13:31
Firmware Update - Mobile Connector
Correction Code 50010003
Update
Note
Charge the vehicle to at least 55% before continuing with this procedure.
- Open the LH front door.
- Connect the Mobile Connector to a wall outlet.
- Use the button on the Mobile Connector to open the charge port door, and then connect the Mobile Connector to the vehicle.
-
On the touchscreen charging menu, touch Set Limit, and then set the charge limit below the current charge level.
-
The Mobile Connector firmware
update will begin within 1 minute.
NoteA notification will appear on the instrument panel, stating "Charge Connector Update in Progress".
-
The Mobile Connector firmware
update will finish within 3 minutes.
NoteIgnore any charging related error messages that appear on the instrument panel/touchscreen.
- Disconnect the Mobile Connector from the vehicle, and then close the charge port door.
- Disconnect the Mobile Connector from the wall outlet.
- Connect the Mobile Connector to the wall outlet.
- Use the button on the Mobile Connector to open the charge port door, and then connect the Mobile Connector to the vehicle.
-
On the touchscreen charging menu, touch Set Limit, and then set the charge limit above the current charge level.
- Make sure that the vehicle begins charging.
- Disconnect the Mobile Connector from the vehicle, and then close the charge port door.
- Disconnect the Mobile Connector from the wall outlet.