Cover - Trailer Hitch (Remove and Replace)
Correction code 10016002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
-
Release the tabs (x10) and plastic
retainers (x2) that attach the trailer hitch cover to the vehicle, and then remove the
cover from the vehicle.
CAUTIONThe plastic retainers are captive. Do not pry on the retainers as they may snap off.
Install
-
Position the trailer hitch cover onto
the vehicle, and then secure the tabs (x10) and plastic retainers (x2) that attach the
cover to the vehicle.