Button - Cushion Adjust - Driver Seat (Remove and Replace)
Correction code 13018102 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.
Remove
- Open the LH front door.
- Move the driver seat forward.
-
Using a trim tool, carefully remove
the LH front seat cushion switch.
Tip: Use a twisting motion with the trim tool to release the switch.CAUTIONMake sure the seat trim and the switch are not damaged during removal.
Install
-
Position the LH front seat cushion
switch to the seat, and then install the switch to the seat.
NoteVerify the switch operates correctly after installation.
- Move the driver seat to the original position.
- Close the LH front door.