22/05/2024 02:25:04

Rocket Clip - Seat Cushion - 3rd Row - LH (Remove & Replace)

Correction code 13092102 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open all the four doors and lower both front windows.
  2. Move the 1st and 2nd row seats forward.
  3. Push down on the 3rd row seat cushion, feel for the rocket clips (x2), and then disengage the locking tabs. Release and support the cushion.
    Informational PurposesAn informational icon, calling your attention
    Note
    The clips locate on both ends of the seat cushion.
  4. Press the tab and slide to remove the 3rd row LH cushion rocket clip.

Install

  1. Remove the telescoping hood prop, then press the tab and slide to install the 3rd row LH cushion rocket clip.
  2. Secure the rocket clips (x2) into the LH and RH latches to install the 3rd row seat cushion.
  3. Move the 1st and 2nd row seats to original position.
  4. Raise both front windows and close all the four doors.