Hose - Washer - Cowl Screen (Remove and Replace)
Correction code
17500012
0.20
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to learn
more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com.
NOTE: See Personal Protection to make sure proper PPE is worn when
performing the below
procedure.
Remove
- Remove the cowl screen. See Panel - Cowl Screen (Remove and Replace).
-
Release the clips that attach cowl
screen wiper hose to the cowl screen, and then remove the cowl screen wiper hose.
Install
-
Position the cowl screen wiper hose to
the cowl screen, and then install the clips that attach the cowl screen wiper hose to
the cowl screen.
- Install the cowl screen. See Panel - Cowl Screen (Remove and Replace).