23/06/2022 09:42:23

Escutcheon - Seatbelt - 2nd Row - Center (Remove and Replace)

Correction code 20056602 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the LH falcon wing door.
  2. Release the clip that attaches the center 2nd row seat belt escutcheon to the seat assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Pry from the lower portion of the escutcheon to release it from the seat assembly.
  3. Remove the clip from the center 2nd row seat belt escutcheon.
  4. Remove the center 2nd row seat belt escutcheon from the seat belt.

Install

  1. Install the center 2nd row seat belt escutcheon onto the seat belt.
  2. Install the metal clip onto the center 2nd row seat belt escutcheon.
  3. Slide the rear of the center 2nd row seat belt escutcheon into the seat assembly, and then secure the clip that attaches the escutcheon to the seat assembly.
  4. Close the LH falcon wind door.