10/11/2022 08:14:30

Buckle - 2nd Row - Center (5 Seat) (Remove and Replace)

Correction code 20057212 1.08 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open all the doors and lower the front windows.
  2. Open the liftgate.
  3. Remove the LH 2nd row seat assembly from the vehicle. See Seat Assembly - 2nd Row - LH (5 Seat) (Remove and Replace).
  4. Unfold the LH 2nd row seat assembly.
  5. Release the clip that attaches the center 2nd row buckle connector to the seat frame, and then disconnect the buckle connector.
    Tip: Use of the following tool(s) is recommended:
    • Pick Miniature Soft Grip, 90 degree tip, 6 in
  6. Remove the bolt that attaches the center 2nd row buckle to the seat frame, and then remove the buckle from the seat.
    Tip: Use of the following tool(s) is recommended:
    • Flex head ratchet/flex head torque wrench
    • Torx T50 socket

Install

  1. Position the center 2nd row buckle on the seat, and then install the bolt that attaches the buckle to the seat frame.
    45 Nm (33.2 lbs-ft)
    Tip: Use of the following tool(s) is recommended:
    • Flex head ratchet/flex head torque wrench
    • Ratchet/torque wrench
    • Torx T50 socket
  2. Connect the center 2nd row buckle connector, and then install the clip that attaches the connector to the seat frame.
  3. Fold the LH 2nd row seat assembly.
  4. Install the LH 2nd row seat assembly. See Seat Assembly - 2nd Row - LH (5 Seat) (Remove and Replace).