Bezel - Top Tether - 2nd Row (Remove and Replace)
Correction code
130803202
0.06
NOTE: Unless
otherwise explicitly stated in the procedure, the correction code and its
associated FRT reflect all of the work required to perform this procedure,
including the linked procedures. Do not stack correction
codes unless explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are created.
NOTE: See Personal Protection to make
sure you are wearing proper PPE when performing the procedure below.
NOTE: See Ergonomic Precautions for safe and healthy
working practices.
Remove
- Open the liftgate.
-
Carefully use a plastic trim tool to release the clips (x4) that attach the bezel to
the body.
Install
-
Install the clips (x4) that attach the bezel to the body.
- Close the liftgate.