2022-06-23

Seatbelt Intermediate Web Guide (Remove and Replace)

Correction code 20054302 0.18 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Remove the LH upper B-pillar trim. See Trim - B-Pillar - Upper - LH (Remove and Replace).
  2. Remove the bolts (x2) and washers (x2) that attach the seatbelt intermediate web guide to the vehicle, and then remove the guide from the vehicle.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 8 mm socket

Install

  1. Position the seatbelt intermediate web guide into the vehicle, and then install the bolts (x2) and washers (x2) that attach the guide to the vehicle.
    5 Nm (3.7 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 8 mm socket
  2. Install the LH upper B-pillar trim. See Trim - B-Pillar - Upper - LH (Remove and Replace).