17/06/2022 13:07:59

Seal - B-Pillar Applique - LH (Remove and Replace)

Correction code 11700802 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so. NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure proper PPE is worn when performing the below procedure.

Remove

  1. Open the LH doors and lower the LH front window.
  2. Release the tabs (x4) that attach the LH B-pillar applique seal to the vehicle, and then remove the seal from the vehicle.
    Informational PurposesAn informational icon, calling your attention
    Note
    Release LH B-pillar seal from the applique perimeter and front roof applique assembly.

Install

  1. Position the LH B-pillar applique seal onto the vehicle, and then secure the tabs (x4) that attach the seal to the body and upper bright assembly.
    Informational PurposesAn informational icon, calling your attention
    Note
    Ensure the seal is properly seated along the perimeter onto the front roof applique.
  2. Raise the LH front window and close the LH doors.