Switch - Hazard Warning (Remove and Replace)
Correction code
17407002
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate Times to
learn more about FRTs and how they are
created.
NOTE: See Personal Protection to make sure proper PPE is worn
when performing the
below
procedure.
Remove
- Open the RH front door and lower the RH front window.
-
Remove the Hazard warning switch. See
Phone Dock - Center Console (Remove and Replace).
TIpIt is not necessary to remove components from the phone dock assembly.
Install
- Install the Hazard warning switch. See Phone Dock - Center Console (Remove and Replace).
- Raise the RH front window and close the RH front door.