Table 1. Torque Specifications: GUID-30172FD0-D1A5-4594-A995-251201C053EB.htmlSteering Column (RHD) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the steering column intermediate shaft to the steering gear input shaft	18 Nm (13.3 lbs-ft)	13 mm socket Ratchet/torque wrench	Reuse
Nut that attaches the steering column to the cross car beam	15 Nm (11.1 lbs-ft)	13 mm socket 3 in extension Flex head ratchet/flex head torque wrench	Reuse

Table 2. Torque Specifications: Steering Controller (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x4) that attach the bright surround to the steering wheel, and then remove the surround	5.4 Nm (4.0 lbs-ft)	T20 socket	Reuse
Screws (x2) that attach the steering wheel controls ECU to the bright surround	0.9 Nm (8 lbs-in)	T10 Torx bit	Reuse

Table 3. Torque Specifications:Steering Rack (Dual Motor) (LHD) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Inner bolts that attach the steering gear assembly to the front subframe	75 Nm (55.3 lbs-ft)	18 mm socket 6 in extension	Reuse
Outer bolts that attach the steering gear assembly to the front subframe	47 Nm (34.7 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench 11 in extension	Reuse
Outer bolts that attach the steering gear assembly to the front subframe
Bolts that attach the underhood storage unit bracket to the cooling fan assembly	16 Nm (11.8 lbs-ft)	10 mm socket 2 in extension	Reuse
Nut that attaches the tie rod end to the knuckle	180 Nm (132.7 lbs-ft)	10 mm 12pt combination wrench 22 mm 12pt combination wrench 3 in extension	Replace
Jamb nut onto the outer tie rod end.	80 Nm (59.0 lbs-ft)	Combination 12pt 21 mm wrench Wheel alignment torque wrench kit	Reuse
Bolt that attaches the steering gear assembly to the electric steering column	18 Nm (13.3 lbs-ft)	13 mm socket	Reuse

Table 4. Torque Specifications:Steering Rack (RWD) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Inner bolts that attach the steering gear assembly to the front subframe	75 Nm (55.3 lbs-ft)	18 mm socket 6 in extension	Reuse
Outer bolts (13 mm) that attach the steering gear assembly to the front subframe	27 Nm (19.9 lbs-ft)	13 mm socket Flex head ratchet/flex head torque wrench 11 in extension	Reuse
Outer bolts (15 mm) that attach the steering gear assembly to the front subframe	47 Nm (34.7 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench 11 in extension	Reuse
Bolts that attach the underhood storage unit bracket to the cooling fan assembly	16 Nm (11.8 lbs-ft)	10 mm socket 2 in extension	Reuse
Nut that attaches the tie rod end to the knuckle	180 Nm (132.7 lbs-ft)	10 mm 12pt combination wrench 22 mm 12pt combination wrench 3 in extension	Replace
Jamb nut onto the outer tie rod end.	80 Nm (59.0 lbs-ft)	Combination 12pt 21 mm wrench Wheel alignment torque wrench kit	Reuse
Bolt that attaches the steering gear assembly to the electric steering column	18 Nm (13.3 lbs-ft)	13 mm socket	Reuse

Table 5. Torque Specifications: Steering Wheel (Remove and Install)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Steering wheel to steering column bolt	80 Nm (59.0 lbs-ft)	10 mm hex 3/8 in std ratchet 3/8 in flex head torque wrench (installation only) 3 in extension	Replace	PN - 1036655-00-A

Table 6. Torque Specifications: Module - Steering Column Control (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Upper screws that attach the steering column lower shroud to steering column	1.5 Nm (1.1 lbs-ft)	Torx T20 socket ¼ in std ratchet 2 in extension Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Torx T20 bit, 70 mm Wiha ¼ in bit holder adapter Wiha torque setter	Reuse
Lower screw that attaches steering column lower shroud to steering column	1.5 Nm (1.1 lbs-ft)	Torx T20 socket ¼ in std ratchet 2 in extension Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Torx T20 bit, 70 mm Wiha ¼ in bit holder adapter Wiha torque setter	Reuse
Bolt that attaches the steering column control module to the steering column	9 Nm (6.6 lbs-ft)	5 mm hex ball end bit ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Reuse

Table 7. Torque Specifications: All

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the steering column intermediate shaft to the steering gear input shaft	18 Nm (13.3 lbs-ft)	13 mm socket Ratchet/torque wrench	Reuse
Nut that attaches the steering column to the cross car beam	15 Nm (11.1 lbs-ft)	13 mm socket 3 in extension Flex head ratchet/flex head torque wrench	Reuse
Screws (x4) that attach the bright surround to the steering wheel, and then remove the surround	5.4 Nm (4.0 lbs-ft)	T20 socket	Reuse
Screws (x2) that attach the steering wheel controls ECU to the bright surround	0.9 Nm (8 lbs-in)	T10 Torx bit	Reuse
Inner bolts that attach the steering gear assembly to the front subframe	75 Nm (55.3 lbs-ft)	18 mm socket 6 in extension	Reuse
Outer bolts that attach the steering gear assembly to the front subframe	47 Nm (34.7 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench 11 in extension	Reuse
Bolts that attach the underhood storage unit bracket to the cooling fan assembly	16 Nm (11.8 lbs-ft)	10 mm socket 2 in extension	Reuse
Nut that attaches the tie rod end to the knuckle	180 Nm (132.7 lbs-ft)	10 mm 12pt combination wrench 22 mm 12pt combination wrench 3 in extension	Replace
Jamb nut onto the outer tie rod end.	80 Nm (59.0 lbs-ft)	Combination 12pt 21 mm wrench Wheel alignment torque wrench kit	Reuse
Bolt that attaches the steering gear assembly to the electric steering column	18 Nm (13.3 lbs-ft)	13 mm socket	Reuse
Inner bolts that attach the steering gear assembly to the front subframe	75 Nm (55.3 lbs-ft)	18 mm socket 6 in extension	Reuse
Outer bolts (13 mm) that attach the steering gear assembly to the front subframe	27 Nm (19.9 lbs-ft)	13 mm socket Flex head ratchet/flex head torque wrench 11 in extension	Reuse
Outer bolts (15 mm) that attach the steering gear assembly to the front subframe	47 Nm (34.7 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench 11 in extension	Reuse
Bolts that attach the underhood storage unit bracket to the cooling fan assembly	16 Nm (11.8 lbs-ft)	10 mm socket 2 in extension	Reuse
Nut that attaches the tie rod end to the knuckle	180 Nm (132.7 lbs-ft)	10 mm 12pt combination wrench 22 mm 12pt combination wrench 3 in extension	Replace
Jamb nut onto the outer tie rod end.	80 Nm (59.0 lbs-ft)	Combination 12pt 21 mm wrench Wheel alignment torque wrench kit	Reuse
Bolt that attaches the steering gear assembly to the electric steering column	18 Nm (13.3 lbs-ft)	13 mm socket	Reuse
Steering wheel to steering column bolt	80 Nm (59.0 lbs-ft)	10 mm hex 3/8 in std ratchet 3/8 in flex head torque wrench (installation only) 3 in extension	Reuse
Upper screws that attach the steering column lower shroud to steering column	1.5 Nm (1.1 lbs-ft)	Torx T20 socket ¼ in std ratchet 2 in extension Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Torx T20 bit, 70 mm Wiha ¼ in bit holder adapter Wiha torque setter	Reuse
Lower screw that attaches steering column lower shroud to steering column	1.5 Nm (1.1 lbs-ft)	Torx T20 socket ¼ in std ratchet 2 in extension Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Torx T20 bit, 70 mm Wiha ¼ in bit holder adapter Wiha torque setter	Reuse
Bolt that attaches the steering column control module to the steering column	9 Nm (6.6 lbs-ft)	5 mm hex ball end bit ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Reuse

Table 8. Torque Specifications: GUID-9A1D2D1B-F4D4-4C65-90D1-5C70E54F5404.html

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the steering gear assembly to the intermediate shaft assembly	18 Nm (13.3 lbs-ft)	Cordless Ratchet/Impact Driver 13 mm socket 6 in extension Flex head ratchet/flex head torque wrench	Reuse
Bolts (x2) that attach the front support beam to the vehicle	48 Nm (35.4 lbs-ft)	External Torx E14 3 in extension Cordless Ratchet/Impact Driver Flex head ratchet/flex head torque wrench	Reuse
LH and RH bolts (x2) that attach the cooling fan module assembly to the front support beam	10 Nm (7.4 lbs-ft)	8 mm socket 6 in extension Universal Joint 1/4in Cordless Ratchet/Impact Driver Flex head ratchet/flex head torque wrench Ratchet/torque wrench	Reuse
Inner bolts (x2) that attach the steering gear assembly to the front subframe	75 Nm (55.3 lbs-ft)	Cordless Ratchet/Impact Driver 18 mm socket 6 in extension Universal Joint 3/8in Flex head ratchet/flex head torque wrench	Reuse
Outer bolts (x2) that attach the steering gear assembly to the front subframe	47 Nm (34.7 lbs-ft)	15 mm socket Cordless Ratchet/Impact Driver 6 in extension Flex head ratchet/flex head torque wrench	Reuse