Table 1. Torque Specifications: 12V/LV Battery (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
(Lead acid) positive/negative cable to the battery terminal	6 Nm (4.4 lbs-ft)	10 mm deep socket ¼ in std ratchet 4 in extension	Reuse
(Li-Ion) bolts that attach the LV battery to the bracket	6 Nm (4.4 lbs-ft)	8 mm socket ¼ in std ratchet 4 in extension	Reuse	Early production vehicles have M6 bolts with 10 mm bolt head. Torque those to 10 Nm

Table 2. Torque Specifications: 12V/LV Power (Disconnect and Connect)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
(Lead acid) positive/negative cable to the battery terminal	6 Nm (4.4 lbs-ft)	10 mm deep socket ¼ in std ratchet 4 in extension	Reuse

Table 3. Torque Specifications: Antenna - Bluetooth Passive Entry - Rear (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the Bluetooth passive entry module to the body	3.5 Nm (2.6 lbs-ft)	T30 socket 2 in extension	Replace	Patch bolt

Table 4. Torque Specifications: Bracket - Headlight - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the headlight bracket to the headlight	1.8 Nm (1.3 lbs-ft)	Torx T25 socket 6 in extension	Reuse

Table 5. Torque Specifications: Bracket - Radar - Front (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the front radar bracket to the front end carrier	8 Nm (5.9 lbs-ft)	10 mm socket 6 in extension Flex head ratchet/flex head torque wrench	Reuse

Table 6. Torque Specifications: Camera - Triple - Forward Facing (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Forward facing camera assembly to windshield bracket screws	1 Nm (.7 lbs-ft)	Torx T10 blade attachment Wiha torque setter Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only)	Reuse

Table 7. Torque Specifications: GUID-A4C2CAAD-A839-4CB5-8A2B-8A28B0AFC497.html

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the forward facing camera fan	0.12 Nm (1 lbs-in)	Torx T6 bit Digital Torque Screwdriver 0.10Nm - 2.0Nm	Reuse

Table 8. Torque Specifications: Harness - Electronic Parking Brake (EPB) - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH rear EPB harness bracket to the LH rear caliper	5 Nm (3.7 lbs-ft)	10 mm socket 4 in extension	Reuse
Bolt that attaches the LH rear EBP harness bracket to the body	5 Nm (3.7 lbs-ft)	10 mm socket	Reuse

Table 9. Torque Specifications: Harness - Subassembly - Thermal (Heat Pump) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the supermanifold to the shock tower brace	31 Nm (22.9 lbs-ft)	15 mm socket Flex head ratchet/flex head torque wrench	N/A	These bolts are loosened but not removed in this procedure
Outer bolt that attaches the shock tower brace to the vehicle	62 Nm (45.7 lbs-ft)	15 mm deep socket Flex head ratchet/flex head torque wrench	Reuse
Inner bolt that attaches the shock tower brace to the vehicle	55 Nm (40.6 lbs-ft)	15 mm deep socket Flex head ratchet/flex head torque wrench	Reuse

Table 10. Torque Specifications: Headlight - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the headlight to the body	5.9 Nm (4.4 lbs-ft)	10 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Reuse
Bolt that attaches the fender bracket to the body	3 Nm (2.2 lbs-ft)	Torx T20 socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Reuse

Table 11. Torque Specifications: Horn Assembly (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the horn assembly to the front subframe	12 Nm (8.8 lbs-ft)	10 mm socket 6 in extension	Reuse	Recommend flashlight for visibility

Table 12. Torque Specifications: Light - Fog / Reverse - Rear - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the rear fog/reverse light to the deck lid	3.2 Nm (2.4 lbs-ft)	8 mm deep socket 4 in extension	Reuse

Table 13. Torque Specifications: Light - Turn Signal / Fog - Front - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the LH front turn signal/fog light to the front fascia	2.8 Nm (2.1 lbs-ft)	Torx T25 socket 4 in extension	Reuse

Table 14. Torque Specifications: Module - Body Controller - Front (Heat Pump) (Remove and Replace) (For Vehicles with 16V Batteries)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the ground cable to the front controller.	8.5 Nm (6.3 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench Ratchet/torque wrench	Reuse
Bolts (x2) that attach the front body controller module shield assembly to the front body controller	8.5 Nm (6.3 lbs-ft)	Flex head ratchet/flex head torque wrench 4 in extension 10 mm socket Ratchet/torque wrench	Reuse
Bolts (x3) that attach the front body controller module to the vehicle	10 Nm (7.4 lbs-ft)	Flex head ratchet/flex head torque wrench 10 in extension 10 mm socket Ratchet/torque wrench	Reuse

Table 15. Torque Specifications: Module - Body Controller - LH (LHD) (Non-Heat Pump) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the 12V cable to the LH body controller module	8.5 Nm (6.3 lbs-ft)	10 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Replace
Nut that attaches the LH body controller module to the vehicle	6 Nm (4.4 lbs-ft)	10 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Replace

Table 16. Torque Specifications: Module - Body Controller - LH (RHD) (Non-Heat Pump) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the 12V cable to the LH body controller module	8.5 Nm (6.3 lbs-ft)	10 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Replace
Nut that attaches the LH body controller module to the vehicle	6 Nm (4.4 lbs-ft)	10 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Replace

Table 17. Torque Specifications: Module - Body Controller - RH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nuts (x2) that attach the RH side carpet locator bracket to the vehicle	2.5 Nm (1.8 lbs-ft)	10 mm socket ¼ in std ratchet 2 in extension	Reuse
Nuts that attach the electrical wiring to the RH body controller module		10 mm deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Replace
Nut that attaches the DCDC positive cable from the RH body controller module	8.5 Nm (6.3 lbs-ft)	10 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension
Nut that attaches the RH body controller module to the body		10 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Replace

Table 18. Torque Specifications: Module - Body Controller - RH (RHD) (Non-Heat Pump) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the DCDC positive cable from the RH body controller module	8.5 Nm (6.3 lbs-ft)	10 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	2 in extension
Nut that attaches the 12V cable to the RH body controller module	8.5 Nm (6.3 lbs-ft)	10 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only) 4 in extension	Replace
Nut that attaches the RH body controller module to the body		10 mm socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension	Replace

Table 19. Torque Specifications: Module - Body Controller - Security (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws that attach the security body controller module to the cup holder décor panel	1.6 Nm (1.2 lbs-ft)	Torx T20 socket Ratchet/torque wrench Wiha TorqueVario-S 0.80Nm - 2.0Nm Wiha 1/4" Bit Holder Adapter	Reuse
Screws (x4) that attach the LH center console bright strip to the center console assembly	1.6 Nm (1.2 lbs-ft)		Reuse

Table 20. Torque Specifications: Module - Body Controller - Security (2nd Generation) (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Screws (x14) that attach the center console bright strip to the center console assembly	1.6 Nm (1.2 lbs-ft)		Reuse
Screws (x2) that attach the security body controller module to the cup holder décor panel	1.6 Nm (1.2 lbs-ft)	Torx T20 socket	Reuse

Table 21. Torque Specifications: Sensor - Level - Windshield Washer (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Lower bolt that attaches the windshield washer reservoir to the body	3 Nm (2.2 lbs-ft)	Flex head ratchet/flex head torque wrench 10mm Flex Head combination wrench 10 mm socket Flashlight LED Ratchet/torque wrench 2 in extension	Reuse
Upper bolt that attaches the windshield washer reservoir to the body	3 Nm (2.2 lbs-ft)	Ratchet/torque wrench 2 in extension 10 mm socket	Reuse

Table 22. Torque Specifications: Strap - 12V Battery (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
12V Battery Tie Down Strap Nut or Bolt	5 Nm (3.7 lbs-ft)	10 mm deep socket ¼ in std ratchet	Reuse	Older vehicles use a nut near the rear of the strap. Newer vehicles use a bolt at the front of the strap.

Table 23. Torque Specifications: System - Windshield Washer (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the water tank to the vehicle	3 Nm (2.2 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench 6 in extension	Reuse

Table 24. Torque Specifications: Taillight - LH (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Taillight to body nuts	3.2 Nm (2.4 lbs-ft)	8 mm 12-point deep socket ¼ in std ratchet ¼ in torque wrench (installation only)

Table 25. Torque Specifications: Wiper Arms (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut that attaches the LH wiper arm to the wiper motor assembly	25 Nm (18.4 lbs-ft)	15 mm socket 3/8 in std ratchet 3/8 in torque wrench (installation only)	Reuse
Nut that attaches the RH wiper arm to the wiper motor assembly	25 Nm (18.4 lbs-ft)	15 mm socket 3/8 in std ratchet 3/8 in torque wrench (installation only)	Reuse

Table 26. Torque Specifications: Wiper Module (Remove and Replace)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the wiper module to the vehicle	7 Nm (5.2 lbs-ft)	10 mm socket 2 in extension	Reuse

Table 27. Torque Specifications: Horn - Low Tone (Remove and Replace) (LV Battery)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt securing the low tone horn to horn assembly bracket	9.5 Nm (7.0 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench	Reuse

Table 28. Torque Specifications: Horn - High Tone (Remove and Replace) (Heat Pump)

Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt securing the high tone horn to horn assembly bracket	9.5 Nm (7.0 lbs-ft)	10 mm socket Flex head ratchet/flex head torque wrench	Reuse