Duct - Fresh Intake (Remove and Replace)
Correction code 181085020.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace).
- Release the fresh intake duct from the studs (x2) on the bulkhead, and then remove the duct from the vehicle.
Install
Installation procedure is the reverse of removal.