24/06/2020 13:23:31

Cup Holder - 2nd Row (Remove and Replace)

Correction code 13082002 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the RH rear door.
  2. Fold down the armrest.
  3. Use a plastic trim tool to release the cup holder from the locking tabs.
  4. Lift up on the cup holder and remove it from the vehicle.

Install

  1. Install a new cup holder into the armrest.
    Informational PurposesAn informational icon, calling your attention
    Note
    Press firmly on the edges of the cup holder to engage the locking tabs.
  2. Return the armrest to the upright position.
  3. Close the RH rear door.