Liner Stiffener- Front Wheel House - LH (Remove and Replace)
Correction code
10018802
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
Remove
- Turn steering wheel fully to the right.
- Remove push clips (x3) that attach LH front wheel arch liner to vehicle.
- Pull front portion of LH wheelhouse liner away from front fascia.
-
Remove the LH front wheel housing liner reinforcement from the front
fascia.
Install
- Install the LH front wheel housing liner reinforcement from the front fascia.
- Move LH wheelhouse liner back into installed position.
-
Install the push clips (x3)
that attach LH front wheel arch liner to vehicle.
- Turn steering wheel fully to center.