Harness - Fascia - Rear (Remove and Replace)
Correction code
17101102
0.60
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the rear fascia. See Fascia - Rear (Remove and Install).
- Disconnect the rear fascia harness connectors (x6).
- Remove the clips that attach the rear fascia harness to the upper rear fascia, and then remove the harness from the assembly.
Install
Installation procedure is the reverse of removal.