2020-04-20

Fascia - Rear - Lower (Remove and Replace)

Correction code 10012902 0.72 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Torque Specifications

Table 1. Torque Specifications: Fascia - Rear - Lower (Remove and Replace)
Description Torque Value Recommended Tools Reuse/Replace Notes
Bolts that attach the lower rear fascia to the upper rear fascia
3 Nm (2.2 lbs-ft)
  • 10 mm socket
  • 4 in extension
Reuse

Remove

  1. Remove the rear fascia diffuser. See Diffuser - Rear Fascia (Remove and Replace).
  2. Remove the bolts (x2) that attach the lower rear fascia to the upper rear fascia.
    3 Nm (2.2 lbs-ft)
    Informational PurposesAn informational icon, calling your attention
    TIp
    Use of the following tool(s) is recommended:
    • 10 mm socket
    • 4 in extension
  3. Release the clips (x10) that attach the lower fascia to the upper fascia, and separate the fascias.

Install

Installation procedure is the reverse of removal.