Torque Specifications - Safety and Restraint

Table 1. Torque Specifications: Airbag - Curtain - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the LH curtain airbag to the body	9 Nm (6.6 lbs-ft)	10 mm socket 2 in extension	Reuse

Table 2. Torque Specifications: Buckle - 1st Row - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Patchbolt that attaches the buckle to the seat track	40 Nm (29.5 lbs-ft)	Torx T50 socket 3/8 in std ratchet 3/8 in torque wrench (installation only) 3 in extension	Replace	1117250-00-A

Table 3. Torque Specifications: Buckle - 2nd Row - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Patched bolt that attaches the LH buckle to the body of the vehicle	40 Nm (29.5 lbs-ft)	15 mm socket 3 in extension Inductive heating tool (if necessary)	Replace	Bolt is patched. Inductive heater can be used if bolt is difficult to remove.

Table 4. Torque Specifications: Buckle - 2nd Row - Center (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the RH and center buckles to the body	40 Nm (29.5 lbs-ft)	15 mm socket 3 in extension	Replace

Table 5. Torque Specifications: Module - Restraint Control (Non-Heat Pump) (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Restraint control module to vehicle nuts	8 Nm (5.9 lbs-ft)	10 mm socket 2 in extension ¼ in std ratchet ¼ in torque wrench (installation only)	Replace

Table 6. Torque Specifications: Sensor - Impact Accelerometer - B-Pillar - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches B-Pillar accelerometer to vehicle body	8 Nm (5.9 lbs-ft)	10 mm socket ¼ in std ratchet	Reuse

Table 7. Torque Specifications: Adjustable Top Loop (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Patchbolt that attaches the upper D-ring to the B-pillar	20 Nm (14.7 lbs-ft)	Torx T50 socket 3/8 in std ratchet 3/8 in flex head torque wrench (installation only) 3 in extension	Replace
Bolt that attaches the adjustable top loop to the B-pillar	20 Nm (14.7 lbs-ft)	Torx T47 socket 3/8 in std ratchet 3/8 in flex head torque wrench (installation only)

Table 8. Torque Specifications: Airbag - Knee - Front Passenger (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the front passenger knee airbag to the instrument panel	2 Nm (1.5 lbs-ft)	Torx T20 socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension
Bolts (x4) that attach the front passenger knee airbag to the instrument panel	8 Nm (5.9 lbs-ft)	Torx T20 socket ¼ in std ratchet ¼ in torque wrench (installation only) 2 in extension or External Torx E10 ¼ in std ratchet Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Wiha ¼ in bit holder adapter Wiha torque setter ¼ in to 3/8 in adapter

Table 9. Torque Specifications: Airbag - Knee - Driver (Remove and Install)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts (x2) that attach the driver knee airbag to the vehicle	2 Nm (1.5 lbs-ft)	Torx T20 socket ¼ in std ratchet 4 in extension Wiha TorqueVario-S 0.8 Nm - 2.0 Nm screwdriver (installation only) Wiha torque setter ¼ in to 3/8 in adapter
Torx T30 bolts (x4) that attach the driver knee airbag to the instrument panel	8 Nm (5.9 lbs-ft)	Torx T30 socket ¼ in std ratchet
External Torx E10 bolts (x4) that attach the driver knee airbag to the instrument panel	8 Nm (5.9 lbs-ft)	External Torx E10 3/8 in std ratchet 3 in extension ¼ in torque wrench (installation only) ¼ in to 3/8 in adapter

Table 10. Torque Specifications: Pretensioner - Outboard Lap - 1st Row - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the pretensioner to the seat track	40 Nm (29.5 lbs-ft)	Torx T50 socket 3/8 in std ratchet 3/8 in torque wrench (installation only) 3 in extension	Replace

Table 11. Torque Specifications: Retractor - Seatbelt - 1st Row - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Patchbolt that attaches the upper D-ring to the B-pillar	20 Nm (14.7 lbs-ft)	Torx T50 socket 3/8 in std ratchet 3/8 in torque wrench (installation only) 3 in extension	Replace
Bolts that attach the seat belt webbing guide to the B-pillar, and then remove the guide from the B-pillar	3.5 Nm (2.6 lbs-ft)	8 mm socket ¼ in std ratchet ¼ in torque wrench (installation only)	Reuse
Patchbolt that attaches the seat belt retractor to the base of the B-pillar	40 Nm (29.5 lbs-ft)	13 mm 12-point deep socket 3/8 in std ratchet 3/8 in torque wrench (installation only)	Replace

Table 12. Torque Specifications: Seatbelt - 2nd Row - Center (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the armrest assembly to the seat back	15 Nm (11.1 lbs-ft)	Torx T45 socket 3 in extension	Reuse
Bolt that attaches the center 2nd row seat belt to the seat back frame	45 Nm (33.2 lbs-ft)	13 mm deep socket 13 mm socket	Reuse

Table 13. Torque Specifications: Seatbelt - 2nd Row - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the 2nd row LH lower seat belt anchor to the body	30 Nm (22.1 lbs-ft)	15 mm socket 3 in extension	Replace
Bolt that attaches the seat belt retractor to the body	30 Nm (22.1 lbs-ft)	13 mm socket 3 in extension	Replace

Table 14. Torque Specifications: Sensor - Impact Accelerometer - Front Bumper - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolt that attaches the airbag sensor to the front end carrier	10 Nm (7.4 lbs-ft)	10 mm deep socket ¼ in std flex head ratchet ¼ in flex head torque wrench (installation only)	Reuse

Table 15. Torque Specifications: GUID-AC3A3075-412A-4ED0-AAFB-7DEE7E97BAC3.html
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Bolts that attach the seat belt webbing guide to the B-pillar, and then remove the guide from the B-pillar	5 Nm (3.7 lbs-ft)	8 mm socket ¼ in std ratchet ¼ in torque wrench (installation only)	Reuse

Table 16. Torque Specifications: Actuator - Pedestrian Protection - LH (Remove and Replace)
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes
Nut Pyrotechnic actuator to vehicle body nuts.	6 Nm (4.4 lbs-ft)	Torx T30 socket ¼ in std ratchet	Reuse

Table 17. Torque Specifications:
Description	Torque Value	Recommended Tools	Reuse/Replace	Notes