12/10/2023 06:58:49

Carrier Bracket - Cowl Screen - LH (Remove & Replace)

Correction code 12251122 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the LH hood hinge cover. See Cover - Hinge - Active Hood - LH (Remove and Replace).
  2. Insert a rag over the hood latch to keep the hood slightly open.
  3. Remove the clips (x2) that attach the LH side of the cowl screen to the vehicle, and then release the LH side of the cowl screen from the vehicle.
  4. Release the clip that attaches the LH cowl screen carrier bracket to the vehicle, and then remove the LH cowl screen carrier bracket from the vehicle.

Install

  1. Install the LH cowl screen carrier bracket to the vehicle.
  2. Install the LH side of the cowl screen to the vehicle.
  3. Open the hood and remove the rag from over the hood latch.
  4. Install the LH hood hinge cover. See Cover - Hinge - Active Hood - LH (Remove and Replace).