29/06/2020 12:27:38

Armrest - 2nd Row (Remove and Replace)

Correction code 13058002 0.12 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open all four doors and move the front LH and RH seats fully forward.
  2. Fold down the RH 2nd row seatback assembly.
  3. Remove the bolt that attaches the 2nd row armrest to the LH 2nd row seat back assembly.
    15 Nm (11.1 lbs-ft)
  4. Pull the RH side of the 2nd row center armrest towards the front of the vehicle, and then slide the 2nd row armrest out of the LH 2nd row seat back assembly.

Install

Installation procedure is the reverse of removal.