Stop - Trunk - LH (Remove and Replace)
Correction code
11330902
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
- 2025-09-10: Update title from Liftgate Stop to Trunk Stop.
- 1588903-00-A Body Gap and Flush Tool
Remove
-
Use the body gap and flush
tool to measure the gap of liftgate and record the value.
- Open trunk from exterior switch.
-
Remove the LH liftgate
stop.
Install
-
Install the LH liftgate
stop.
- Close trunk from exterior switch.
- Verify gap/flush of liftgate, and adjust it if necessary.