Gas Strut - Trunk - LH (Remove and Replace)
Correction code
11334002
0.12
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.
NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email ServiceManualFeedback@tesla.com.
NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure. See Ergonomic Precautions for safe and healthy working practices.
Remove
- Open the trunk and support it with a prop.
-
Release the clip that attaches the lower end of the LH trunk gas strut to the hinge on the vehicle.
-
Release the clip that attaches the upper end of the LH trunk gas strut to the hinge on the trunk lid, and then remove the strut from the vehicle.
Install
Installation procedure is the reverse of removal, except for the following:
- Lubricate both pivot points on the LH trunk gas strut.