17/11/2022 15:18:46
Cooling System (Check and Fill)
Correction code 18300200 0.10 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Procedure
- Remove the cabin intake duct. See Duct - Cabin Intake (Remove and Replace).
-
Remove the coolant reservoir
cap.
Figure 1. Superbottle cap on pre-heat pump Model 3 
Figure 2. Coolant bottle cap on heat pump vehicles 
- Fill the coolant reservoir to the MAX line.
- Install the coolant reservoir cap.
- Install the cabin intake duct. See Duct - Cabin Intake (Remove and Replace).