Cover - Footwell - Passenger (LHD) (Remove and Replace)
Correction code 14055402 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
- 2024-01-03: Added notes for disconnecting the electrical wiring harness connectors.
Remove
- Release the clips that attach the passenger footwell cover to the vehicle.
-
Disconnect the electrical wiring harness connectors from the puddle light and emergency speaker.
CAUTIONDo not disconnect the connectors by pulling on the harness.NoteIf needed, use a pocket screwdriver to assist disconnecting.
- Remove the footwell cover from the vehicle.
- Release the clips that attach the puddle light to the passenger footwell cover, and then remove the puddle light from the footwell cover.
Install
Installation procedure is the reverse of removal.