22/05/2018 13:19:22
Hinge - Trunk - LH (Remove and Replace)
Correction code
11335602
0.30
NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.
Remove
- Remove the trunk assembly. See Trunk (Remove and Install).
- Remove the LH side trunk trim. See Trim - Side - Trunk - LH (Remove and Replace).
- Use masking tape to mark the position of the trunk hinge on the body.
- Remove the LH trunk gas strut. See Gas Strut - Trunk - LH (Remove and Replace).
-
Remove the nuts that attach the LH trunk hinge to the body, and remove the hinge from the vehicle.
24 Nm (17.7 lbs-ft)
Install
Installation procedure is the reverse of removal.