24/06/2020 13:52:28

Seal - Outer Belt - Rear Door - LH (Remove and Replace)

Correction code 11704402 0.06 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Open the LH rear door and lower the window.
  2. Pry the outer belt seal from the rear door, and then remove the seal from the rear door.

Install

Installation procedure is the reverse of removal.