Switch - Child Safety - Underhood Storage Area (Remove and Replace)
Correction code
15241402
0.06
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the hood latch cover. See Cover - Hood Latch (Remove and Replace).
-
Release the clips that attach the child safety switch to the hood latch cover, and remove the switch from the cover.
Install
Installation procedure is the reverse of removal.