04/09/2024 15:07:01
Seal - Glass Run - Front Door - LH (Remove and Replace)
Correction code
11701112
0.30
NOTE: Unless otherwise explicitly
stated in the procedure, the above correction code and FRT reflect all of the work
required to perform this procedure, including the linked procedures. Do not stack correction codes unless
explicitly told to do so.NOTE: See Flat Rate
Times to learn more about FRTs and how they are created. To provide feedback on
FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when
performing the below procedure.
Remove
- Remove the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Install).
- Remove the LH front door inner belt seal from the door. See Seal - Inner Belt - Front Door - LH (Remove and Replace).
- Remove the LH door mirror assembly. See Mirror - Door - LH (Remove and Replace).
-
Pull upwards to remove the LH front door glass run seal from the LH front door.
Install
-
Position the new LH front door glass run seal on the LH front door.
Tip: If necessary, apply a small amount of P80 lubricant on the length of the seal to aid installation.
- Install the LH door mirror assembly. See Mirror - Door - LH (Remove and Replace).
- Install the LH front door inner belt seal. See Seal - Inner Belt - Front Door - LH (Remove and Replace).
- Install the LH front door trim panel. See Panel - Door Trim - Front - LH (Remove and Install).