2018-02-09

Duct - HVAC Plenum - Inner (Remove and Replace)

Correction code 18109002 0.36 NOTE: Unless otherwise explicitly stated in the procedure, the above correction code and FRT reflect all of the work required to perform this procedure, including the linked procedures. Do not stack correction codes unless explicitly told to do so.NOTE: See Flat Rate Times to learn more about FRTs and how they are created. To provide feedback on FRT values, email LaborTimeFeedback@tesla.com. NOTE: See Personal Protection to make sure wearing proper PPE when performing the below procedure.

Remove

  1. Remove the rear underhood apron. See Underhood Apron - Rear (Remove and Replace).
  2. Remove the outer HVAC plenum. See Duct - HVAC Plenum - Outer (Remove and Replace).
  3. Remove the hood latch cover. See Cover - Hood Latch (Remove and Replace).
  4. Remove the underhood storage unit. See Underhood Storage Unit (Remove and Replace).
  5. Remove the LH and RH wiper arms. See Wiper Arms (Remove and Replace).
  6. Remove the LH and RH shock tower cover. See Cover - Shock Tower - LH (Remove and Replace).
  7. Remove the cowl screen panel. See Panel - Cowl Screen (Remove and Replace).
  8. Release the clips that attach the inner HVAC plenum, and then remove the inner HVAC plenum from the vehicle.

Install

Installation procedure is the reverse of removal.